This study evaluates the seismically induced displacements of a slope using the Finite Element Method (FEM) in comparison to the results of twelve empirical predictive approaches. First, the existing methods to analyze the stability of slopes subjected to seismic loads are presented and their capabilities to predict the onset of failure and post-failure behavior are discussed. These methods include the pseudostatic method, the Newmark method, and stress-deformation numerical methods. Whereas the pseudostatic method defines a seismic coefficient for the analysis and provides a safety factor, the Newmark method incorporates a yield coefficient and the actual acceleration time history to estimate permanent displacements. Numerical methods incorporate advanced constitutive models to simulate the coupled stress-strain soil behavior, making the process computationally more costly. In this study, a model slope previously studied at laboratory scale is selected and scaled up to prototype dimensions. Then, the slope is subjected to 88 different input motions, and the seismic displacements obtained from the numerical and empirical approaches are compared statistically. From correlation analyses between seven ground motion parameters and the numerical results, new empirical predictive equations are developed for slope displacements. The results show that overall the FEM displacements are generally in agreement with the numerically developed methods by Fotopoulou and Pitilakis (2015) labelled "Method 2" and "Method 3", and the Newmark-type Makdisi and Seed (1978) and Bray and Travasarou (2007) methods for rigid slopes. Finally, functional forms for seismic slope displacement are proposed as a function of peak ground acceleration (PGA), Arias intensity (Ia), and yield acceleration ratio (Ay/PGA). These functions are expected to be valid for granular slopes such as earth dams, embankments, or landfills built on a rigid base and with low fundamental periods (Ts<0.2). / Master of Science / A landslide is a displacement on a sloped ground that can be triggered by earthquake shaking. Several authors have investigated the failure mechanisms that lead to landslide initiation and subsequent mass displacement and proposed methodologies to assess the stability of slopes subjected to seismic loads. The development of these methodologies has to rely on field data that in most of the cases are difficult to obtain because identifying the location of future earthquakes involves too many uncertainties to justify investments in field instrumentation (Kutter, 1995). Nevertheless, the use of scale models and numerical techniques have helped in the investigation of these geotechnical hazards and has led to development of equations that predict seismic displacements as function of different ground motion parameters. In this study, the capabilities and limitations of the most recognized approaches to assess seismic slope stability are reviewed and explained. In addition, a previous shaking-table model is used for reference and scaled up to realistic proportions to calculate its seismic displacement using different methods, including a Finite Element model in the commercial software Plaxis2D. These displacements are compared statistically and used to develop new predictive equations. This study is relevant to understand the capabilities of newer numerical approaches in comparison to classical empirical methods.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/100797 |
| Date | 05 November 2020 |
| Creators | Copana Paucara, Julio |
| Contributors | Civil and Environmental Engineering, Yerro Colom, Alba, Rodriguez-Marek, Adrian, Mauldon, Matthew |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds