The dewatering characteristics of polyaluminum chloride (Hyper⁺Ion 1050A) sludges were investigated using lab-scale tests including specific resistance to filtration (r*), capillary suction time (CST), and sludge pH. The effects of chemical conditioning (lime and cationic polymer) and mixing intensity (Gt) upon the sludge dewatering characteristics in a pilot-scale plate and frame press were also studied.
The dewatering characteristics of the Hyper⁺Ion sludges were found to be dependent upon the influent water turbidity conditions; specifically, the ratio of aluminum coagulant to total dry solids in the sludge. Lime was an effective conditioner for doses that produced a sludge pH value in the range of 11.5 to 11.8 which, again, was a direct function of the aluminum coagulant fraction in the sludge. Cationic polymer and a combination of lime and polymer were also effective conditioning schemes when the appropriate dose and mixing intensity were applied. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/41514 |
| Date | 12 March 2009 |
| Creators | Wise, Lynn V. |
| Contributors | Environmental Engineering |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis, Text |
| Format | ix. 103 leaves, BTD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 25119783, LD5655.V855_1991.W583.pdf |
Page generated in 0.0026 seconds