Return to search

ESTUDO DO EFEITO DA SUJIDADE NA EFICIÊNCIA DE MÓDULOS FOTOVOLTAICOS

Submitted by admin tede (tede@pucgoias.edu.br) on 2018-08-23T10:49:49Z
No. of bitstreams: 1
FELIPE RABELO RODRIGUES ALVES.pdf: 2420637 bytes, checksum: 29b86a56944a6b8d8dd2f04052fb7420 (MD5) / Made available in DSpace on 2018-08-23T10:49:49Z (GMT). No. of bitstreams: 1
FELIPE RABELO RODRIGUES ALVES.pdf: 2420637 bytes, checksum: 29b86a56944a6b8d8dd2f04052fb7420 (MD5)
Previous issue date: 2018-06-06 / The dependence on nonrenewable sources and concern about high levels of pollutant
emissions encourage the use of systems that are derived from renewable resources. In
this way, photovoltaic systems are seen as promising because they depend on a clean
and abundant source, especially in areas of tropical climate, the solar radiation.
However, the accumulation of soiling on the surfaces of photovoltaic modules is one of
the main environmental factors that cause of the loss of efficiency of these systems,
together with irradiance, temperature and shading. In this sense, the present work seeks
to verify the soiling effects on the efficiency of photovoltaic modules, through data
collection, measurement of specific parameters, statistical analysis and comparisons of
scenarios of dirty and clean modules. For the verification and quantification of soiling
interference in the efficiency of photovoltaic modules, the electrical and environmental
parameters capable of characterizing them are obtained: Isc - Short circuit current (A);
Voc - Open circuit voltage (V); G - Solar irradiance (W/m²); T - Module temperature
(°C). From the results it can be observed that the intensity of the solar radiation has
greater influence on the current of the module, while the temperature directly affects the
voltage. This work showed that, in the universe studied, soiling has reduced the power
generation efficiency of modules by 3,2% for accumulated soiling in periods of 45 days,
and by 18% for accumulated soiling in a longer period of 3,5 years. The
characterization of the soiling showed that in addition to mineral particles, there is also
organic matter derived from biofilms, which makes it difficult to clean the modules by
natural methods (rains and winds). Based on the bibliography and the tests realized, it
is estimated that the periodicity of the hygiene should not exceed 60 days, with that, the
effects of the soiling are reduced significantly. / A dependência por fontes não renováveis e a preocupação com os elevados níveis de
emissões de poluentes estimulam o uso de sistemas que são provenientes de recursos
renováveis. Com isso, são vistos como promissores os sistemas fotovoltaicos, por
dependerem de uma fonte limpa e abundante, em especial em áreas de clima tropical, a
radiação solar. Porém, o acúmulo de sujeira nas superfícies de módulos fotovoltaicos é
um dos principais fatores ambientais que causam perda de eficiência desses sistemas,
juntamente com irradiância, temperatura e sombreamento. Neste sentido, o presente
trabalho busca verificar os efeitos da sujidade na eficiência dos módulos fotovoltaicos,
por meio de coletas de dados, medições de parâmetros específicos, análise estatística e
comparações de cenários de módulos sujos e limpos. Para a comprovação e
quantificação da interferência da sujidade na eficiência de módulos fotovoltaicos são
obtidos os parâmetros elétricos e ambientais capazes de caracterizá-los, são eles: Isc -
Corrente de curto-circuito (A); Voc - Tensão de circuito aberto (V); G - Irradiância solar
(W/m²); T - Temperatura do módulo (°C). A partir dos resultados pode-se observar que
a intensidade da radiação solar tem maior influência sobre a corrente do módulo,
enquanto que a temperatura afeta diretamente a tensão. Este trabalho comprovou que,
no universo estudado, a sujidade diminuiu a eficiência dos módulos em até 3,2% para
sujeira acumulada em períodos de 45 dias, e em até 18% para sujidades acumuladas por
um período mais longo, de 3,5 anos. A caracterização da sujidade demonstrou que além
de partículas minerais, há também matéria orgânica derivada de biofilmes, que dificulta
a limpeza dos módulos pelos métodos naturais (chuvas e ventos). Com base na
bibliografia e nos ensaios realizados, estima-se que a periodicidade de higienização não
deva exceder 60 dias, assim os efeitos da sujidade são reduzidos significativamente.

Identiferoai:union.ndltd.org:IBICT/oai:ambar:tede/4010
Date06 June 2018
CreatorsAlves, Felipe Rabelo Rodrigues
ContributorsLuz, Marta Pereira da, Carneiro, Marcos Lajovic, Marra, Enes Gonçalves
PublisherPontifícia Universidade Católica de Goiás, Programa de Pós-Graduação STRICTO SENSU em Engenharia de Produção e Sistemas, PUC Goiás, Brasil, Escola de Engenharia::Curso de Engenharia de Produção
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da PUC_GOAIS, instname:Pontifícia Universidade Católica de Goiás, instacron:PUC_GO
Rightsinfo:eu-repo/semantics/openAccess
Relation-1070195191083529415, 500, 500, 600, 1572319646979764410, -481632546729251245

Page generated in 0.0609 seconds