The content of this thesis is about preparation and processing of lead-free piezoceramic materials with perovskite structure. Potassium sodium niobate (KNN) powder was prepared by solid state reaction (SSR) and liquid phase reaction (sol-gel reaction). The powders were formed by uniaxial and isostatic pressing and further sintered. The density, grain size and morphology were determined on the sintered samples. The powder, synthesised by SSR and sintered in a conventional furnace, was chosen as a standard. The maximum density achieved on samples after optimization of sintering cycle was 93 %TD. The sintering optimization involved a homogenization step at 950 °C, which promotes the correct development of the phase composition and microstructure, followed by sintering at 1120 °C. The same approach and sintering cycle were used for sintering the samples, prepared by sol-gel synthesis. The maximum density of the samples prepared by sol-gel reaction and sintered in a conventional way, was 92 %TD. For further comparison, both of the synthesised powders were sintered using SPS (spark plasma sintering), which increased their final density up to 97 %TD. The approximate value of the piezoelectric coefficient d33 (pC/N) has been measured on selected SSR samples with pure phase composition ((K0,5Na0,5)NbO3). The best measured value of d33 was around 100 pC/N.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417056 |
| Date | January 2020 |
| Creators | Karkuszová, Karina |
| Contributors | Spusta, Tomáš, Částková, Klára |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds