This thesis presents the achievements pursued during the doctoral course. The work was carried out in the context of the project ERiCSol (Energia RInnovabile e Combustili SOLari), as part of the University of Trento strategic plan for the years 2017-2021. The project was conceived to establish an interdepartmental area to promote the challenge of developing scientific research and technological innovation to increase the competitiveness of Trento at national and international level in the areas of energy and environment. Among all the goals of the project, this work dedicates special attention to 1) development of novel materials for solar photocatalytic reactions and 2) use of renewable energy to push forward applications in water remediation. To accomplish these goals, the research brings a full collection of experimental activities regarding the employment of solar concentration for the environment industry and therefore this document is organized in 9 chapters. In chapter 1, it is presented the introduction outlining the overview of the environment industry, the employment of solar light as energy source and the general and specific objectives.
Chapter 2 presents a literature review regarding the last 30 years of applications correlating the use of solar light towards wastewater purification. The chapter reviews the engineering features of solar collectors, photocatalyst materials employed and the panorama of the pollutants investigated up to the present date in solar photocatalysis, presenting comparisons between models and real wastewater approaches. Chapter 3 details the experimental techniques and characterizations employed to sustain the investigation proposed in the thesis. The first part of the chapter explains the features of parabolic dish solar concentrator designed and manufactured by the IdEA group at the physics department of the university of Trento. After, it is presented the pulsed laser deposition, a thin films fabrication technique employed to produce the photocatalysts used on water purification experiments. The second part of the chapter presents the description of the characterization techniques used to reveal the fabricated photocatalyst materials properties. Based on the review on the fundamentals of solar photocatalysis and the experimental techniques, chapters 4 and 5 present a discussion in the field of novel photocatalytic materials capable to operate under concentrated sunlight irradiation. Chapter 4 in special presents the investigation regarding the fabrication of tungsten trioxide (WO3) thin film coatings, bringing the novelty of using pulsed laser deposition as the fabrication method and the evaluation of this material in photocatalysis for the degradation of methylene blue dye model pollutant. Chapter 5 instead, presents the development on Zinc Oxide (ZnO) nanoparticles, bringing an innovative point of view on a “green-synthesis” approach and the material immobilization in film for heterogeneous photocatalysis routes. Chapters 6 and 7 discuss solar photocatalysis aiming to shift applications from model pollutants to real wastewater remediation conditions. Important comparisons are performed and discussed regarding the advantages and existing drawbacks. To fulfill this purpose, chapter 6 presents an application case of solar photocatalysis to the degradation of a surfactant-rich industrial wastewater whereas chapter 7 presents the approach focused on the remediation of organic lead contaminants present on a local water well site in the city of Trento. The last experimental approach of concentrated solar light is presented on chapter 8, dedicated to the application of concentrated sunlight towards waste biomass valorization. Conversely to the application on water previously described, this chapter presents the activity on designing, fabricating and coupling a hydrothermal reactor with concentrated sunlight using it as the driving force to promote degradation of grape seeds evolving into hydrochars with possible valorization of the carbonized material. Lastly, chapter 9 presents the conclusions and suggestions, this item expresses the final considerations on the results of the experimental investigations, advantages and limitations observed, and suggests possible actions for future works.
| Identifer | oai:union.ndltd.org:unitn.it/oai:iris.unitn.it:11572/285695 |
| Date | 14 January 2021 |
| Creators | Fendrich, Murilo Alexandre |
| Contributors | C. Maurizio, S. Berardi, Fendrich, Murilo Alexandre, Quaranta, Alberto, Miotello, Antonio |
| Publisher | Università degli studi di Trento, place:Trento |
| Source Sets | Università di Trento |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | firstpage:1, lastpage:181, numberofpages:181, alleditors:C. Maurizio, S. Berardi |
Page generated in 0.002 seconds