M.Eng. / The need and problem was originated from the trends of the earths dwindling energy resource. As time progresses humans are becoming more aware of need to use so called “alternative energy sources” to alleviate the main energy converters i.e. power stations. The student was tasked with investigating the thermal performance of a solar powered refrigeration cycle (prototype) that could: produce enough refrigeration effect that it replaces the standard home vapour compression unit, used for cooling or freezing of foods, heats up a geyser sufficiently to have hot water for a common house hold, has excess energy to heat or cool liquid or air based environments and has the potential to lower the electrical bill of a house. The introductory step was to obtain the thermo fluid properties of aqua ammonia solutions. A setback came about when determining the aqua ammonia properties. There were too many conflicting properties being yielded by six different authors. In an attempt to gain confidence in only one author a comparison table was prepared. The table compared the six authors to each other. By looking at all the values compared it brought great clarity to the problem. When continuing the research into the fundamental law approach of solving for the cycle new findings were made. Initially very little comprehensive studies were done which explained in fundamental laws to solve for the absorption cycle. After extensive reviewing of a detailed study on how to solve for absorption refrigeration cycles, then it was able to begin improving on the thermo – fluid design of the cycle. As cycle and component design began to progress the train of thought began to steer in a direction. Each component needed to be detail designed. The advantage of having each component specifically catered for in the cycle design was that it would increase the cycle efficiency. In this way it would ensure that during the concept generation phase the functioning of each component was clear, thereby enabling a clear understanding of how components would compliment each other in a cycle. A mode of solving for the cycle was to endeavour that all parameters could be calculated unambiguously, with the aid of computerisation. Testing was carried out on a real life commercial thermal siphoning machine in order to realistically understand how absorption refrigeration works and gain experience. At the end of the study the most important result is that the dissertation research shows strong evidence that it will be possible to create a device which can fulfil the four tasks listed above. Another result is a program which is a refined cycle design of the pump absorption type refrigeration. The program solves for points along the cycle. Lastly it was found that even though EES was the simpler program to use for aqua ammonia solution properties it was the only program which catered for sub cooling and super heating.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:6672 |
| Date | 15 March 2010 |
| Creators | Santos, Nelson de Sousa Pedro dos |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0022 seconds