The object of this investigation was to develop a general solution for the thermal stresses and strains in a hollow cylindrical case-bonded solid propellant.
The heat conduction equation, as solved by Carslaw and Jaeger, was applied to a hollow composite cylinder. The temperature distribution from this equation was used in conjunction with the stress and strain for an elastic solid propellant. The boundary conditions were employed to solve for the constants and the general solution for the stresses and strains were obtained.
In order to study the predictions of the general expressions, a numerical example was presented. It was found that the maximum stress and strain appeared at the inner radius of the grain. It was also observed that the stress and strain increased with an increase in the radius ratio "m”.
Failure criteria for the grain under consideration were discussed. A method for obtaining the maximum allowable temperature variation (from cure temperature) was investigated. Knowing the stress and strain characteristics of the grain the equations developed would indicate failure conditions and also allow calculations of the maximum allowable temperature variations prior to grain failure. / M.S.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/101356 |
| Date | January 1962 |
| Creators | Iverson, George Dudley |
| Contributors | Aerospace Engineering |
| Publisher | Virginia Polytechnic Institute |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis, Text |
| Format | 44 leaves, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 20297973 |
Page generated in 0.0022 seconds