Given the rapid aging of the worldâ s population, improvements in technology for automation of patient care and documentation are badly needed. This project is based on previous research that demonstrated a â smartâ bed that can non-intrusively monitor a patient in bed and determine a patient's respiration, heart rate and movement without intrusive or restrictive medical measurements. The â smartâ bed is an application of spatially distributed integrating fiber optic sensors. The basic concept is that any patient movement that also moves an optical fiber within a specified area will produce a change in the optical signal. A statistical mode (STM) sensor and a high order mode excitation (HOME) sensor were previously investigated, based on which the author developed the present design including both modal modulation approaches. Development was made in both hardware and software for the combined STM/HOME sensor: a special lens system was installed allowing only the high order modes of the optical fiber to be excited and coupled into the sensor; computer-processing method was used for handling output from the dual STM-HOME sensor, which would offer comprehensive perturbation analysis for more reliable patient monitoring. Experimental results of simulating human body breathing and heartbeats by periodic mechanical perturbations are also presented, and the relative advantage and drawbacks of the two modal modulation approaches are discussed. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/37093 |
| Date | 04 May 2005 |
| Creators | Xu, Xiaohua |
| Contributors | Physics, Spillman, William B. Jr., Indebetouw, Guy J., Ritter, Alfred L. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Master's project |
| Format | application/pdf |
| Rights | I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to Virginia Tech or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
| Relation | SmartBedProjectReport.pdf |
Page generated in 0.0026 seconds