The main goal of this diploma thesis was to implement the proposal of optical access networks in the selected location. Introduce is focused on the physical layer of network. This includes optical fibers, optical cables, connectors, optical splitters, and more. According to the place of termination of optical fiber will be studied best FTTx connections. According to network topology distinguished point to point and point to multipoint network. Networks points to point are also known as an active optical network and for each user are restricted to a separate fiber. Point to multipoint networks known as passive optical network. In terms of the PON is defined by many standards. For a selected location will be choice the most appropriate solution. Finally, the measurement will be made and will be considered for monitoring the route. Before the design of optical access networks, I made an illustrative simulation in program OptSim. Performed simulations helps to study the transmission characters of optical networks, depending on the physical architecture. In general, for the design of high-capabilities networks for large companies will be more appropriate active topology that provides due wavelength multiplexes high transmission capacity. To join in the urban areas with a large number of separate houses, it is more appropriate use of passive topology. For the design of optical networks has been selected location with multiple housing buildings. The end customer is not given the requirement for high data transfer rates as large companies. For the proposal was selected FTTB networks which is suitable because of lower costs. The second variant of the proposal was a passive optical network according to standard GPON. This standard was chosen because of the high splitting ratio. For both solutions was developed the entire proposal by ITU-T with a detailed drawing documentation. In the selected area was conducted measuring the optical networks in order to verify the possibility of extension actual solutions. For a sample issue of measurements, I made several measurements using optical reflectometer over an optical splitter in order to prove the need for measurements during construction. FTTH networks gaining in popularity more and more, but price is the limiting factor.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:218198 |
| Date | January 2009 |
| Creators | Tejkal, Vladimír |
| Contributors | Němec, Karel, Reichert, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds