Return to search

CFD Simulation and Measurement of Flow Forces Acting on a Spool Valve

Directional control valves are widely used in hydraulic systems to control the flow direction and the flow rate. In order to design an actuator for such a valve a preliminary analysis of forces acting on the spool is necessary. The dominant axial force is the so called steady flow force, which is analysed within this study. For this purpose a 2/2-way spool valve with a sharp control edge was manufactured and investigated. CFD simulations were carried out to visualize the fluid flow inside the valve. The measured and simulated axial forces and pressure drops across the test valve are compared and show good qualitative correlation. However, the simulated values of axial forces are in average by 32 % lower compared with the measured ones. Therefore, the components of the axial force were scrutinized revealing a dominancy of the pressure force acting on ring areas in the spool chamber. Although CFD simulations are preferably used to save resources, the results of this study emphasise the importance of the experiments.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:14-qucosa-200318
Date02 May 2016
CreatorsBordovsky, Patrik, Schmitz, Katharina, Murrenhoff, Hubertus
ContributorsDresdner Verein zur Förderung der Fluidtechnik e. V. ,, Technische Universität Dresden, Fakultät Maschinenwesen
PublisherSaechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typedoc-type:conferenceObject
Formatapplication/pdf
Source10th International Fluid Power Conference (10. IFK) March 8 - 10, 2016, Vol. 2, pp. 473-484

Page generated in 0.0022 seconds