Abstract
This thesis describes position-sensitive devices (PSDs) and optical sensor systems suitable for industrial tracking and displacement sensing
applications. The main application areas of the proposed sensors include automatic pointing of a rangefinder beam and measuring the lateral
displacement of an object.
A conventional tracking sensor is composed of a laser illuminator, a misfocused quadrant detector (QD) receiver and a corner cube retroreflector
(CCR) attached to the target. The angular displacement of a target from the receiver optical axis is detected by illuminating the target and
determining the direction of the reflection using the QD receiver. The main contribution of the thesis is related to the modifications proposed
for this conventional construction in order to make its performance sufficient for industrial applications that require a few millimetre to
submillimetre accuracy. The work includes sensor optical construction modifications and the designing of new types of PSDs.
The conventional QD-based sensor, although electrically very sensitive, is not considered optimal for industrial applications since its precision
is severely hampered by atmospheric turbulence due to the misfocusing needed for its operation. Replacing the CCR with a sheet reflector is found
to improve the precision of the conventional sensor construction in outdoor beam pointing applications, and is estimated to allow subcentimetre
precision over distances of up to 100 m under most operating conditions. Submillimetre accuracy is achievable in close-range beam pointing
applications using a small piece of sheet reflector, coaxial illumination and a focused QD receiver. Polarisation filtering is found to be
effective in eliminating the main error contributor in close-range applications, which is low reflector background contrast, especially in cases
when a sheet reflector has a specularly reflecting background.
The tracking sensor construction is also proposed for measuring the aiming trajectory of a firearm in an outdoor environment. This time an order
of magnitude improvement in precision is achieved by replacing the QD with a focused lateral effect photodiode (LEP). Use of this construction in
cases of intermediate atmospheric turbulence allows a precision better than 1 cm to be achieved up to a distance of 300 m. A method based on
averaging the positions of multiple reflectors is also proposed in order to improve the precision in turbulence-limited cases.
Finally, various types of custom-designed PSDs utilising a photodetector array structure are presented for long-range displacement sensing
applications. The goal was to be able to replace the noisy LEP with a low-noise PSD without compromising the low turbulence sensitivity achievable
with the LEP. An order of magnitude improvement in incremental sensitivity is achievable with the proposed array PSDs.
| Identifer | oai:union.ndltd.org:oulo.fi/oai:oulu.fi:isbn951-42-5780-4 |
| Date | 11 October 2000 |
| Creators | Mäkynen, A. (Anssi) |
| Publisher | University of Oulu |
| Source Sets | University of Oulu |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis, info:eu-repo/semantics/publishedVersion |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess, © University of Oulu, 2000 |
| Relation | info:eu-repo/semantics/altIdentifier/pissn/0355-3213, info:eu-repo/semantics/altIdentifier/eissn/1796-2226 |
Page generated in 0.0025 seconds