Return to search

Development and in-vitro investigations of a novel orthodontic adhesive containing bioactive glass for the prevention of white spot lesions

Objectives: 1) To develop and investigate the bioactivities of a novel bioactive glass (BAG) composite designed as an orthodontic adhesive. 2) To investigate the preventive effect, and to test the bond strength of the adhesive. Methods: A novel, calcium and phosphate rich, and fluoride containing, bioactive glass (BAG) was prepared via the melt quench route and incorporated into an experimental resin to produce a light cured paste. The ratio of the resin to the powder was 20:80% respectively. The BAG powder was gradually replaced by a high fluoride and silica content glass (HSG) from 80%, to 60%, 50%, 40%, 25% and 0%. 90 disks (1.26mm thickness and 10mm diameter) were produced from each composition to be immersed in 3 solutions (demineralising artificial saliva pH=4 (AS4), remineralising artificial saliva pH=7 (AS7) and Tris buffer (TB) pH=7.3, 10 ml each. Measurements were taken at 10 time points (from 6 hours to 6 months) in 3 replicas in each solution. Ion release study was determined by ISE and ICP, and pH monitoring was conducted on the resulting solutions. Immersed disks were studied by FTIR, XRD, MAS-NMR and SEM for apatite formation. XMT were used to study the effects of this material on demineralisation/remineralisation in human enamel. Shear bond strength of the adhesive on bovine enamel were studied in different conditions using an Instron machine. Results: The pH increased with time for all the samples with BAG in all solutions and was linearly correlated to BAG loading. Ion release results revealed that the composite disks release up to 15ppm F-, 450ppm Ca2+ and 10ppm PO43- ions, and the release pattern is directly related to the immersion time, with the highest release found in AS4. FTIR spectra, XRD patterns and SEM images showed formation of apatite on all the BAG-resin disks, especially in AS4 and this increase with time. The MAS-NMR spectra indicated fluorapatite was also formed. The XMT studies showed that the novel material reduces demineralisation around the brackets by 80%. The shear bond strength of this novel material was comparable to that of Transbond XT. Conclusion: The novel BAG composites have significant long term releases of F-, Ca2+ and PO43- ions, especially in acidic conditions and form apatite (including FAP) in acidic and neutral solutions. This implies that the material has the potential as an orthodontic adhesive that can prevent white spot lesions around brackets.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:766228
Date January 2018
CreatorsAleesa, Natheer Abdelmajeed Rasheed
PublisherQueen Mary, University of London
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttp://qmro.qmul.ac.uk/xmlui/handle/123456789/46024

Page generated in 0.0022 seconds