As a part of a more extensive project of developing a new finishing line at the Bolivian door manufacturer Tecno Carpinteria San Pedro this thesis presents the development process for a special designed spray booth. The thesis covers every phase from a product idea to a final concept design. Working with finishing of furniture and other wooden products can effect the workers health in a negative way and damage the environment. The final result of the manufactured door is also depending on the how well the ventilation system in the working area is. Because of these reasons it is important to use safety equipment and a good ventilation system in the working area. As a part of this new finishing line San Pedro is in need of a special designed spray booth to control the spread of paint particles and other hazard substances that is a result of the finishing process. Together with the consultant firm CADEFOR a spray booth is designed and a proposal design is presented in this thesis. The result is a design built up with a dry filter solution together with an extractor that creates a cross draft airflow towards the rear part of the spray booth. The result of the project together with some recommendations of increasing the capacity in the finishing line are also presented.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-11829 |
| Date | January 2008 |
| Creators | Axelsson, Daniel |
| Publisher | Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, Institutionen för ekonomisk och industriell utveckling |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.002 seconds