The aim of this master‘s thesis is retrofit of a 300 MW tandem compound steam turbinetype K300 - 170 with three casings and reheat of steam. In the first part a heat balance of the cycle is calculated for given nominal parameters. Further the thesis is focused only on the high pressure section of the turbine, for which the flow section is designed based on thermodynamic calculations and appropriate blade profiles are selected. Then the stress control of the blading is done. The thesis is concluded with estimation of power loss due to shaft seals and real power output of the turbine is calculated. This thesis also includes a drawing of axial section of the high pressure section of the turbine.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231485 |
| Date | January 2014 |
| Creators | Vaľočík, Jan |
| Contributors | Buršík, Michal, Buršík, Michal, Fiedler, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds