Master’s thesis deals with design and calculation of one body condensing steam turbine of 25 MW with samples for paper-making industry. The thesis is focused on calculation of the turbine’s heat balance with two technological samples and regeneration which consists of two low pressure heaters and a deaerator with a power reservoir. The steam turbine is designed with a water cooling condenser with down output. The flow part is calculated with lengths of blades. There are basic strength and proportion calculations. In the end of the thesis the turbine’s heat balance is recalculated to 80% and 105% scheme according to an assignment. Another part of this thesis is a drawing of a longitudinal cut of the turbine including a connector with a gearbox.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230758 |
| Date | January 2013 |
| Creators | Mašek, Martin |
| Contributors | Norbert, Weber, Norbert, Weber, Fiedler, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds