The project elaborated design of technology production of the filter cover - section from the deep drawing sheet 11 325 (DC04). Based on analysis was chosen combination of technologies shearing and deep drawing for that option was designed manufacturing process. Forming process is realized on hydraulic progressive press from Sweden company AP&T which has got total nominal tensile force 1740 kN and equipped 5 stations with lower holders and upper ejectors. Deep drawn part is transported between stations by feeders which are part of press. Function parts are made from alloyed tool steels 19 436 and 19 573 which are heat-worked according to drawing documentation. In chapter technical and economical evaluation was determined turning point which become after reaching of 142 840 parts.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:416424 |
| Date | January 2020 |
| Creators | Bachurek, David |
| Contributors | Forejt, Milan, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds