Return to search

Efficiency and Emissions Study of a Residential Micro–cogeneration System Based on a Stirling Engine and Fuelled by Diesel and Ethanol

This study examined the performance of a residential micro–cogeneration system based on a Stirling engine and fuelled by diesel and ethanol. An extensive number of engine tests were conducted to ensure highly accurate and reproducible measurement techniques. Appropriate energy efficiencies were determined by performing an energy balance for each fuel. Particulate emissions were measured with an isokinetic particulate sampler, while a flame ionization detector was used to monitor unburned hydrocarbon emissions. Carbon monoxide, nitric oxide, nitrogen dioxide, carbon dioxide, water, formaldehyde, acetaldehyde and methane emissions were measured using a Fourier transform infrared spectrometer. When powered by ethanol, the system had slightly higher thermal efficiency, slightly lower power efficiency and considerable reductions in emission levels during steady state operation. To further study engine behaviour, parametric studies on primary engine set points, including coolant temperature and exhaust temperature, were also conducted.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/25573
Date31 December 2010
CreatorsFarra, Nicolas
ContributorsThomson, Murray J.
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
Languageen_ca
Detected LanguageEnglish
TypeThesis

Page generated in 0.0018 seconds