Return to search

GPS structural deformation monitoring: the mid-height problem

GPS has been used to monitor engineering structures for a number of reasons. One important reason for monitoring high rise buildings (and other engineering structures) is their safety assessment in events of extreme loading, such as earthquakes and storms. Decisions must be made as soon as possible, whether to allow re-occupation of such buildings, or to assess them for further damage. The time required to reach such decisions is cost-critical, both for the building owner or manager and for the agency doing the assessment. Peak inter-storey drift ratio and detection of permanent damage are some of the damage assessment parameters recommended by assessment agencies. Traditionally, accelerometers have been used to monitor these parameters. Accelerometers measure accelerations which are double-integrated to get displacements. These double integrated displacements are then used for computing the inter-storey drift ratios and locating permanent damage. Displacements obtained by double-integration and inter-storey drift ratios by subtraction of these displacements, are often erroneous and unreliable and direct measurement of displacement is preferred. Direct measurement of displacement is required at a number of points along the height of the building. For example, for computing inter-storey drift ratios, measurements of displacement at both the floor level and roof level are required. Such points on buildings and other engineering structures of vertical profile are termed as mid-height points in this thesis. While GPS has been used for deformation monitoring of engineering structures and to assist in damage assessment during and after extreme loading events, its use has been limited to roof top installations. / This research is an attempt to measure displacements at mid-height locations of engineering structures of vertical profile using GPS. (For complete abstract open document).

Identiferoai:union.ndltd.org:ADTP/245055
Date January 2008
CreatorsRaziq, Noor
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsTerms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access

Page generated in 0.002 seconds