In the year 2000 John Pendry described a new kind of lens that could focus both the propagating and evanescent components of light. This ‘super’ lens, which took the form of a thin slab of silver with a negative effective index of refraction under certain conditions, had the ability to reproduce images much smaller than the wavelength of light, seemingly in violation of the diffraction limit that governed the performance of conventional optics. Despite significant controversy regarding the purported operation of such superlenses, the first experimental samples were fabricated in 2005, with features as small as 63 nm successfully imaged with 365 nm light. These results put to rest disbelief in the feasibility of superlenses and ushered in an era of intense interest in near-field phenomena and negative index materials (NIMs).
Despite sustained effort, progress on the practical implementation of superlenses was slow, with a further five years passing before improved experimental results were published. In the meantime, a proliferation of analytical and modelling studies appeared on the behaviour and properties of superlenses, as well as numerous suggestions for improved physical designs, very few of which had accompanying experimental evidence. The primary aim of this thesis arose from these many proposals, namely, to reconcile predictions made about the behaviour of superlenses with observed experimental results.
The measurement of the theoretical and practical behaviour of superlenses is addressed in this thesis by the development of a set of characterisation metrics that can be used to describe the imaging performance of a number of near-field imaging systems. These metrics are initially calculated via transfer matrix modelling (TMM), which is a one-dimensional analytical technique traditionally used to find the transmission and reflection coefficients of planar structures. Two families of metrics are derived; one that describes imaging systems in terms of their abilities in generic situations and the other that gives the suitability of an imaging system for application to a given class of object. Transfer functions, bandwidth and peak wavenumber measurements form this first group of characterisation functions, while contrast, pseudo-contrast and correlation coefficients are used to assess the quality of imaging systems when exposed to well-defined input profiles. Both sets of metrics show that the performance of superlenses is highly application-specific, with the fidelity or otherwise of a generated image dependent more on the construction of the superlens than on the maximum spatial frequencies present in the object. The results from the characterisation metrics are also used to guide the design of hypothetical superlens structures; these suggest that sub-diffraction limited resolution may still be available with almost a full wavelength separation between object and image.
The quantitative accuracy of the TMM method is assessed by comparison to full-field vector simulations performed via finite element modelling (FEM), these reveal systematic inadequacies in the application of the TMM technique to superlensing applications. These inadequacies stem from near-field mask-lens interactions that are present in superlens experiments but are not accounted for in TMM calculations. A new technique, based on a modified transfer matrix model (M-TMM), is proposed that accounts for the effects between masks and superlenses by approximating masks as solid slabs of known thickness. Results generated via M-TMM are shown to be in better agreement with FEM models than similar TMM data, even when the duty cycle of the actual mask becomes significant and the approximation in M-TMM is at its most coarse.
Finally, experiments are designed and executed that directly measure the transfer functions of superlenses and other near-field imaging techniques. The problem of intimate contact between optics components, which normally hinders any such attempts to perform lithography in the near-field, is mitigated by including a flexible layer of poly (dimethylsiloxane) (PDMS) between various components in the mask:lens:resist stack. Furthermore, high spatial frequency data corresponding to low nanometre-scale features are retrieved from masks with periodic, micron-scale patterns, greatly easing the requirements on mask construction for these experiments. The end results show good agreement with FEM and M-TMM data and satisfy the aim of this thesis, which was to bridge the divide between the performance expected and experienced from silver superlenses.
| Identifer | oai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/6434 |
| Date | January 2011 |
| Creators | Moore, Ciaran Patrick |
| Publisher | University of Canterbury. Electrical and Computer Engineering Department |
| Source Sets | University of Canterbury |
| Language | English |
| Detected Language | English |
| Type | Electronic thesis or dissertation, Text |
| Rights | Copyright Ciaran Patrick Moore, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml |
| Relation | NZCU |
Page generated in 0.0127 seconds