Surface coal mining has caused significant land-use change in central Appalachia in the past few decades. This landscape altering process has been shown to degrade water quality and impact aquatic communities in the mining-influenced headwater streams of this biodiverse ecoregion. Among pollutants of concern is total dissolved solids (TDS) which is usually measured via its surrogate parameter, specific conductance (SC). The SC of valley fill effluent is a function of fill construction methods, materials, and age; yet hydrologic studies that relate these variables to water quality are sparse due to the difficulty of implementing traditional hydrologic measurements in fill material. We tested the effectiveness of electrical resistivity imaging (ERI) to monitor subsurface hydrologic flow paths in valley fills. ERI is a non-invasive geophysical inverse technique that maps spatiotemporal changes in resistivity of the subsurface. When a resistance or conductive change is induced in the system, ERI can reveal both geologic structure and hydrologic flows. We paired ERI with artificial rainfall experiments to track highly conductive infiltrated water as it moved through the valley fill. The subsurface structure of two other landforms were also imaged to confirm variations between forms. Results indicate that ERI can be used to identify the subsurface geologic structure as well as track the advancing wetting front and preferential flow paths. We observed that the upper portion of a fill develops a profile that more closely resembles soil with smaller particle sizes, while the deeper profile has higher heterogeneity, with large rocks and void spaces. The sprinkling experiments revealed that water tends to pond on the surface of compacted areas until it reaches preferential flowpaths, where it infiltrates quickly and migrates deeply or laterally. We observed water moving from the surface down to a 20 meters depth in one hour and 15 minutes, and to a depth of 10 meters in just 45 minutes. We also observed lateral preferential flow downslope within 5 meters of the surface, likely due to transmissive zones between compacted layers along the angle-of-repose. Finally, when compared to other landscapes we were able to see that a filled highwall slope has larger rocks near the surface than the valley fill, but a similar degree of heterogeneity throughout; while the natural slope has less heterogeneity at depth as is expected in consolidated bedrock. ERI applications can improve understanding of how various fill construction techniques influence subsurface water movement, and in turn aid in the development of valley fill construction methods that will reduce environmental impacts. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/73196 |
| Date | 20 April 2015 |
| Creators | Greer, Breeyn |
| Contributors | Civil and Environmental Engineering, Hester, Erich T., Burbey, Thomas J., Zipper, Carl E. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0028 seconds