<p><em>Determining bumpiness and inclination of surfaces is very important in many different areas, such as airports and at constructions sites. In this study, a surveying trolley and a remote controlled (RC) car were used to determine the bumpiness of two different surfaces. The aim with this study was to test the accuracy of a surveying trolley and an RC car to see how the accuracy can be increased with different observation methods. Total station, GPS and laser scanner surveying equipments were used, and all observations obtained by them were analysed. The laser scanner data was found to have the best precision. For that reason, it was accepted as the “true” data and it was used for comparing and evaluating other methods. It was found that the trolley and the RC car provided good height information with total stations and they were corresponding to the laser scanner data. When they were used with GPS, the accuracy was much lower. It was concluded that using two total stations is not increasing the accuracy, the RC car and the trolley are good measuring methods but not capable to inspect 1,2 mm tolerance for the floors, and finally, 2-3 cm positioning accuracy is obtainable when using GPS.</em></p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:hig-4648 |
| Date | January 2009 |
| Creators | Brodin, Jennie, Konbul, Yunus |
| Publisher | University of Gävle, University of Gävle, Department of Technology and Built Environment, University of Gävle, University of Gävle, Department of Technology and Built Environment |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.0024 seconds