Return to search

Snižování tření cílenou modifikací povrchů / Friction reduction by surface texturing

The aim of this diploma thesis is to experimentally elucidate the connection between the friction of the specimen with the textured surface and the optical observation of the sliding contact surface. The thesis focuses on the configuration of the journal bearing. This configuration is achieved by replacing the block with a circular sapphire section on a block-on-ring tribometer. For exploring of the lubricant film formation, the method of optical interferometry and fluorescence is implemented on the block-on-ring tribometer. These adjustments allow examination of the effect of the textured surface on the friction coefficient and the thickness of the lubricant film. In a mixed mode, the textures cause a significant increase in friction values and reduce the thickness of the lubricant film. The negative influence of dimples increases with the increasing radial load size. In the hydrodynamic mode, the textures have a lower negative effect on the resulting values than in the mixed mode. The changes are dependent on the size of the radial load and the viscosity of the lubricant. In the hydrodynamic mode, cavitation was not observed, and the effect of the textured surface does not correspond to theoretical prerequisites, which is reflected by lower lubricant thickness and higher friction.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:377524
Date January 2018
CreatorsMauer, Milan
ContributorsČermák, Jan, Šperka, Petr
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds