The Very Low Frequency Electromagnetic (VLF-EM) method, which enables surveying without contact with the ground, is suitable for ground surveys in a wide area and has been used in mapping geology for decades. The technique makes use of signal radiation from military navigation radio transmitters operating in the frequency range of 15-30 kHz. When the electromagnetic wave impinges on the surface it is both reflected back into the air and refracted into the earth. By measuring the shifted reflected magnetic field relative to the primary field, subsurface structures can be constrained.
Although the VLF method has been widely used to map geology in the last several decades, few modeling studies have been published. Particularly the effect of topography on VLF measurements is poorly characterized. The objective of my research is to study and simulate the VLF topographic responses, and therefore to distinguish between such responses and actual subsurface resistivity anomalies in VLF-EM data.
A few basic models (homogenous half-space, horizontal contact and vertical contact) were first created using the finite-elements modeling software Comsol Multiphysics and verified with theoretical solutions. Subsequently, features such as hills and lakes were incorporated into these basic models and further analyzed. When modeling topographic effects, two relationships between max inphase / max slope and max Quad / max slope versus skin depth / hill width are found, which can be used to predict topographic effects when the slope of a hill and resistivity of the ground are known. Two different sets of field data acquired at Saskatoon’s Diefenbaker Hill and at Cameco’s Cree Extension are compared with the modeling results.
Identifer | oai:union.ndltd.org:USASK/oai:ecommons.usask.ca:10388/ETD-2015-03-2020 |
Date | 2015 March 1900 |
Contributors | Butler, Samuel |
Source Sets | University of Saskatchewan Library |
Language | English |
Detected Language | English |
Type | text, thesis |
Page generated in 0.0012 seconds