It has been well proven that as the skid resistance of a road surfacing decreases, the number of loss of control type crashes increases, causing road death and injuries. However, the management of skid resistance of road surfacings continues to be difficult due to the inherent and sometimes random variation in skid resistance levels over time. This study is an investigation and analysis of seasonal and short term variation of measured skid resistance in two phases. Phase 1: Regular field monitoring was undertaken using the GripTester and the Dynamic Friction Tester measurement devices on seven sites in the Auckland and Northland Regions of New Zealand was undertaken over a three year period. The effects of temperature, rainfall, contaminants, new surfacings, geometric elements and aggregate properties were analysed to investigate factors that initiate changes in the measured skid resistance of pavement surfacings. Phase 2: Laboratory prepared samples were constructed for accelerated polishing and skid resistance testing of four different aggregates (two greywackes, a basalt and an artificial iron-making melter slag aggregate). The samples were polished in an accelerated polishing machine to an ‘equilibrium skid resistance’ level (Stage 1 polishing). Contaminants were then added to the accelerated polishing process to determine the effect of varying additive, particle size and hardness in an attempt to simulate seasonal and/or short-term variations that occur in the field. The results have demonstrated that significant and previously unpredictable variations (greater than 30%) in measured skid resistance can occur over short time periods. These variations cannot be explained by any one factor. They are the result of a number of inter-related factors, including the geological properties of the aggregates and the contaminants themselves, the previous rainfall history, the road geometry, the calendar month of the year and (depending upon the measurement device), the temperature during testing. The laboratory tests demonstrate that accelerated polishing tests of aggregate samples could be prepared for testing by the Dynamic Friction Tester and that significant variations in measured skid resistance could be simulated on various aggregates in the laboratory by the addition of contaminants. The results of the testing and addition of contaminants on various aggregates resulted in significant behavioural differences which were related to the geological properties of the aggregates themselves, as well as the contaminants used in the accelerated polishing process. The findings of the research have specific relevance to three areas of industry; Road Controlling Authorities who are primarily interested in skid resistance policy, standards and management, Road Asset Managers who operate, maintain and manage condition level and the safety aspects of the road network and Crash Investigators who collect and analyse crash data primarily for legal proceedings. All three of these industry organisations need to clearly understand the inherent variability of skid resistance, the factors involved and the effects that geological and environmental variations have on skid resistance measurement. / Specific appreciation (as outlined below) is given to the significant industry partners/supporters that have helped support the research in many different ways. Firstly, I must give special thanks to Works Infrastructure Limited who have supported the research both financially and with resources almost from the outset of the research programme. The field testing data collection in the Northland Region of New Zealand would not have been possible without the support of the Whangarei Works Infrastructure team which included Peter Houba, Peter King, Matthew Findlay, Glen Kirk and the temporary traffic control team headed by Derek Phillips. Thanks also go to the Auckland Works Infrastructure testing laboratory which supplied aggregate supplies for laboratory sampling and testing and whose technicians also undertook Polished Stone Value tests on the aggregate samples. Special thanks are also given to Michael Haydon and David Hutchison from the technical management team of Works Infrastructure who have always been willing to listen to my requests and the many discussions that we have had on aspects of skid resistance, policy and technical matters. Pavement Management Services and especially Dr John Yeaman and Daniel Rich for their support for the research programme from the beginning, and secondly for financially contributing to the purchase of the Dynamic Friction Tester for the static field testing and the laboratory tests. Achnowledgement is also given to The Ports of Auckland and especially Jo Campbell of the AXIS Intermodal group that allowed access to the rail grid site as a field-testing site outside of normal port operation hours. Transit New Zealand head office staff (Mark Owen, David Cook and Chris Parkman) are also thanked for their support of the research and in enabling access to historic SCRIM and RAMM data on the Transit New Zealand state Highway network. Land Transport New Zealand (formerly Transfund New Zealand) are acknowledged for their significant financial support of the research, in terms of the Land Transport New Zealand Research project that allowed the field research data collection and analysis programme to continue for a further year and for the extension to the controlled laboratory testing.
| Identifer | oai:union.ndltd.org:ADTP/246875 |
| Date | January 2006 |
| Creators | Wilson, Douglas James |
| Publisher | ResearchSpace@Auckland |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated., http://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm, Copyright: The author |
Page generated in 0.0075 seconds