One of the important reasons for the choice of the thesis topic are increasing requirements from the persons interested in low-energy, passive or even houses with almost zero energy consumption. During decreasing of the energy demand is within the framework of the idea of sustainable construction not only required to decrease the total energy demand of the buildings, search and solve the critical spots in the building jacketing, but also to use the secondary raw materials as full-value substitutions for commonly used products from the primary raw materials. The thesis tries to contribute to the possible usage of polymeric wastes in building industry. In an early stage of the thesis the main and partial targets together with the consecutive steps leading to their fulfilment were set. Selection of the suitable secondary raw materials, discussion with the specialists, initial sample mixing, finding their thermally – technical characteristics, press mould and fire kiln acquisition was carried out during the stage. The next phase is focused on the application of the products made from the secondary raw materials to the building envelope. The products are moulded according to the thermally – technical properties. Performed moulding approved that the products are fully functional and after reaching the required value of heat conductivity coefficient products eliminate imperfections of the solutions used at present. Strapping product for the threshold door joint is registered at Industrial Property Office of the Czech Republic and at European Patent Office at the same time. Recycled materials put into production represent possibilities how to decrease number of acquired virgin materials, need of primary energy and how to decrease risks connected to the waste disposal. Society is starting positively approaching to the products that are partially or fully produced from the secondary raw materials. Nevertheless, before the products from the recycled materials enter the peop
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233820 |
| Creators | Smolka, Radim |
| Contributors | Rybárik,, Ján, Schmid, Pavel, Šinogl,, Jiří, Matějka, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds