Return to search

Svařování otěruvzdorných ocelí laserovým svazkem / Laser welding of the abrasive steel

This project, elaborated within the master degree presents plates welding. Based on the literature study the problems of laser welding were designed optimal welding parameters. The material, on which were in the experimental part test and geometry analysis performed was steel Hardox 400 with thickness 5 mm. These welds were compared with welds made by MAG. Equipment used for werding was fiber laser.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230410
Date January 2012
CreatorsBerka, Roman
ContributorsKubíček, Jaroslav, Mrňa, Libor
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0017 seconds