This Masters research proposes a new system which deals with the management of renewable energy sources in a domestic/commercial small scale environment. The aim of the project is to develop an intelligent system which will monitor current in individual circuit loads in a domestic/commercial environment and establish whether the load can be powered from mains supply or be switched to an alternative energy supply in a dynamic way. The alternative energy can be solar energy from photovoltaic panels, wind generators or hydro generation. The switching between supplies is decided by monitoring load currents using a microcontroller and the switching action is taken only at specic allowed instants. The CAN (Controller Area Network)communication system is a two-wire differential serial bus system, developed by Bosch for automotive applications in the early 1980s. Its reliability and robustness in communication between nodes within the control system are the reasons for its popularity. The CAN system is implemented in the Eco Energy Controller. The prototype of the Eco Energy Controller is operational and has been tested with 6 resistive load, 24mH inductive load, and three 25W incandescent light bulbs. Experimental measurements and waveforms indicate that the prototype is successful in switching between two supplies to each of the loads without causing high current peaks during turn on.
Identifer | oai:union.ndltd.org:canterbury.ac.nz/oai:ir.canterbury.ac.nz:10092/5681 |
Date | January 2011 |
Creators | Wen, Yi-Han (Jennifer) |
Publisher | University of Canterbury. Electrical and Computer Engineering |
Source Sets | University of Canterbury |
Language | English |
Detected Language | English |
Type | Electronic thesis or dissertation, Text |
Rights | Copyright Yi-Han (Jennifer) Wen, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml |
Relation | NZCU |
Page generated in 0.1443 seconds