Return to search

Taylor Impact Test and Penetration of Reinforced Concrete Targets by Cylindrical Composite Rods

We use the three-dimensional finite element code DYNA3D to analyze two problems: (a) the normal impact of a cylindrical monolithic or composite rod against a smooth flat rigid target, (commonly known as the Taylor impact test), and (b) the penetration of composite and monolithic steel cylindrical rods into reinforced concrete targets. The composite rod is made of either a steel or copper shell enclosing a ceramic. The ceramic and the steel are assumed to fail at a critical value of the effective plastic strain, whereas no failure is considered in the copper. The thermoviscoplastic response of steel and copper is modeled by the Johnson-Cook relation and the ceramic and concrete are assumed to be elastic-plastic. Values of material parameters in the constitutive relation for the reinforced concrete (RC) are derived by the rule of mixtures. Failure of a material is simulated by the element erosion technique for ceramic and steel, and element erosion along with stiffness reduction for the RC. The effect of the angle of obliquity of impact on the damage induced in the target is ascertained.

For the solid cylindrical copper rod impacting a smooth flat rigid target, the time history of the deformed length and the axial variation of the final diameter are found to match well with the experimental findings. For the composite rod, the diameter of the deformed impacted surface, the shape and size of the mushroomed region and the volume fraction of the failed ceramic material strongly depend upon the impact speed, the shell wall thickness and the thickness of the solid copper rod at the front end.

Some composite cylindrical rods impacting at normal incidence RC targets were found to buckle during the penetration process in the sense that their outer diameter at a cross-section close to the impacted end increased by at least 20%. For steel penetrators, the damage experienced increased as the nose shape got blunter and the angle of obliquity became larger whereas the damage induced to the target only increased with penetrator bluntness. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/34098
Date12 August 2004
CreatorsBallew, Wesley D.
ContributorsEngineering Science and Mechanics, Batra, Romesh C., Hyer, Michael W., Kriz, Ronald D.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/pdf, application/octet-stream, application/octet-stream, application/octet-stream, application/octet-stream, application/octet-stream, application/octet-stream, application/octet-stream
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationCopRiRT1.avi, ComRiRT2_05.avi, ComRiRT1_05.avi, TaylorInput.pdf, Target.pdf, Plot.pdf, Pen.pdf, TaylorPen.pdf, SPiRCT_08.avi, SPiRCT_05.avi, CopRiRT2.avi, Input.pdf, Thesis.pdf, ComRiRCT_03.avi

Page generated in 0.0015 seconds