Photovoltaic thermal (PVT) collectors are widely used to harness a large fraction of the solar spectrum to generate electricity and heat from a single collector. The circulation of the working medium will pass through the collector which cools down the PV cell temperature and also increases the water temperature, which will increase the electrical and thermal performance at the same time. PVT is an emerging technology and is demonstrated for domestic and industrial applications. There has also been a major gap for the techno-economic analysis of PVT system in different climatic conditions and further developing reliable financial models that can be applied in different regions. This thesis paper presents a techno-economic evaluation of a liquid-based PVT collector system developed by Abora Solar, Spain across a wide range of climatic conditions and contexts. The various performance indicators are visualized by digital mapping approach for 86 different locations all over the world. The databank obtained from the analysis is further used to establish a general correlation between collector performance and meteorological parameters such as Global horizontal irradiation and ambient temperature. The collector energetic performance is simulated using a validated and proprietary simulation tool developed by Abora Solar company. The complete energy system consists of a PVT collector, a water storage tank, and the associated DHW demand simulator. The collector energetic performance has reflected following the analysed Global horizontal irradiation and ambient temperature trend. The highest and lowest energy utilization ratio of the collector has been recorded in Reykjavik, Iceland (63%) and Medina, Saudi Arabia (54%) respectively. The highest and lowest exergetic efficiency of the collector has been recorded in Reykjavik, Iceland (23%) and Medina, Saudi Arabia (17%) respectively. The exergetic efficiency collector has shown better performance with the less ambient temperature and less quality of work in high ambient temperatures. Furthermore, the energy utilization ratio and exergetic efficiencies of collector production are analysed. The economic analysis is carried out in realistic approach using two different financial scenarios: mode (1) The total system cost is capital investment in the first year; mode (2) Only 25 % of total system cost is a capital investment and remaining 75 % investment is considered with financing period with certain interest rate. The economic performance of the collector has been decided mainly based on the Net Present Value per unit collector area, whereas it expressed high dependency on thermal energy savings. The average NPV per unit collector area of 86 geographical cities for first financial model 1 and financial model 2 are 1886€ and 2221€ respectively. Besides, the Payback Period has also been estimated for the first financing model in all selected locations. The first financial model (1) has shown better results in locations with a high interest rate and highly recommended for the locations with interest rate. The significant work of understanding of PVT components behaviour at the system level, the collector energetic and economic performance at different climatic conditions across the world have been highlighted which reflects the concrete developments to this research subject area and helps market decision-makers for market penetration.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:du-34513 |
| Date | January 2020 |
| Creators | Penaka, Santhan Reddy |
| Publisher | Högskolan Dalarna, Energiteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds