The stabilising wall element of the Trä8-system is a deep box-type beam/column element which is made of different types of timber composites including framing members of gluedlaminated timber (glulam) and sheathings of laminated veneer lumber (LVL). This element is used as a ―shear wall‖ in multi-storey buildings up to four storeys. To be able to optimise thecomposite stabilising element and use its maximum potential and efficiency, it is necessary to have sufficient fundamental knowledge and information about the structural behaviour and influences of different mechanical properties and geometrical parameters and dimensions of the sub-elements.In this thesis, structural analysis and design principles of the Trä8 stabilising wall element are discussed, including the early stage of erection during assembly to the final usage and residence. A list of required fundamental basic analyses are presented, including accurate deflection analysis for the serviceability limit state, local pre- and post-buckling of the LVL sheathings, global buckling as well as the lateral-torsional buckling of the stabilising element in different design situations. This thesis is then focused on deformations and local instability. For each type of structural problem, accurate, but simple and general methodology is employed to incorporate a large number of effective geometric and property parameters. In this way, a fast evaluation of the influence of different parameters is possible for a wide range of values without needing several time-consuming 3-D finite element (FE) simulations. In several cases, the accuracy and validity of the obtained solutions and formulae are examined and confirmed by comparing their results to those based on the 3-D FE simulations. First, different composite beam theories including shear effects are employed for deflection analysis of the stabilising timber element. Next, an accurate energy-based methodology isdeveloped rendering an explicit formula that gives accurate predictions for the deflection of the stabilising element within a medium range of sheathing or web thicknesses and/or stiffnesses. For weak shear webs, however, this model is not sufficient. Therefore, another new model based on the partial composite interaction theory is developed for accurate deflection predictions of the element having weak shear webs. This model contains simple but accurate formulae for deflection analysis of any similar composite box-type of element with an arbitrary range of geometry and property parameters.Next, shear buckling of the rectangular LVL-panel between the framing members are analysed using differential quadrature (DQ) numerical technique as well as an explicit analytical solution and a formula is established for accurate and fast prediction of the shear pre-buckling of the LVL. This study is extended by considering the effect of each individual lamina of the LVL as well as general orthotropic material properties using a laminated theoryand the DQ solution approach. Further, the post-buckling of the LVL panel is studied based on a simple analytical method with rotating stress fields together with the accurate 3-D FE simulations. A simple formula is then proposed for accurate prediction of the shear post-buckling resistance of the LVL-panel in the stabilising element. As a result of the thesis concerning the two main focus areas, deformations and local instability, explicit analytical formulae are presented for the design of the box-type stabilisingelement with respect to deflections including shear effects in the serviceability limit state and with respect to local shear buckling of the sheathings of the stabilising element including the post-critical area in the ultimate limit state. / <p>Godkänd; 2016; 20160217 (rasata); Nedanstående person kommer att disputera för avläggande av teknologie doktorsexamen. Namn: Seyed Rasoul Atashipour Ämne: Träbyggnad/Timber Structures Avhandling: Structural Analysis of Deep Composite Box-Type Components With Application to a Proprietary Stabilising Timber Wall Element Opponent: Professor Per Johan Gustafsson, Avd för byggnadsmekanik, Lunds tekniska högskola, Lunds universitet, Lund. Ordförande: Professor Ulf Arne Girhammar, Avd för byggkonstruktion- och produktion, Institutionen för samhällsbyggnad och naturresurser, Luleå tekniska universitet, Luleå Tid: Fredag 18 mars, 2016 kl 10.00 Plats: F1031, Luleå tekniska universitet</p>
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-17337 |
| Date | January 2016 |
| Creators | Atashipour, Seyed Rasoul |
| Publisher | Luleå tekniska universitet, Byggkonstruktion och -produktion |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, 1402-1544 |
Page generated in 0.0027 seconds