The thesis deals with methodology for computational approaches for numerical simulations of welding and heat treatment of aluminium alloys. The thesis describes improvement of the current methodology for metallurgical part of the numerical analysis of welding, which is important mainly for prediction of dimensions of the heat affected zone (and deformations). The improvement was carried out based on CHD diagram that describes precipitation and dissolution of phases during continuous heating. The thesis also describes carried material measurements (measurement of chemical composition, dilatometric tests, tensile tests of several conditions of materials at temperatures up to 500 °C and measurement of aging curves), which allowed to significantly refine analysis results for the alloys EN AW-5083 and EN AW-6082. Based on an evaluation of the measurements, several conclusions were made. They can be useful for creation of material databases of other aluminium alloys. The thesis also describes quantification of dependence between tensile strength and yield strength on the Vickers hardness for different conditions of EN AW-6082. There is also methodology for numerical simulation of the heat treatment process of heat treatable Al alloys in the dissertation. The methodology is completely new approach which has never been published so far. Application of this method is based on user changes of the material database in software Sysweld after relatively easy measurement of aging curves. Therefore, the methodology can be considered as promising for application in industrial practice.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:364598 |
Date | January 2017 |
Creators | Vaněk, Mojmír |
Contributors | Věchet, Stanislav, Neumann, Heinz, Daněk, Ladislav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds