The final thesis analyzes the influence of high temperatures on the quality of the glued joints glued with hotmelt polyurethane adhesive. The panels of particle board were finished with ABS edge by using modern technology for edgebanding. The samples were tested in peel test performed at an angle of 90° and shear under compression loading at an angle of 45°. The experiment was carried out for samples stored in standard conditions and samples placed in conditions simulating the internal environment in standardized transport units in intermodal transport. Results were compared with each other, they were also compared with the results for the glued joints with hotmelt ethylene vinyl acetate adhesive.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:362178 |
| Date | January 2016 |
| Creators | Vlčková, Romana |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds