The main subject of this master thesis is to evaluate using of Design of Experiment in industrial company in the development of LED modules for cars. In background study Design of Experiment methodology is described. Next part of background study describes the general principles of termography measurements, next chapter includes the information’s about LED technology and temperature degradation. At the beginning of the practical part is a description of the team analysis due to selection of factors, next chapter validates importance of vias. In next chapter methodology of print circuit board preparations and measuring are described. A next chapter describes the implementation of design of experiment at voltages 8 V, 13,5 V, 16,5 V. Designs of Experiments were made for four or five factors. The reason for this decision was the manual adjustment of printed circuit boards. At the end of each Design of Experiment is the recommendation of factors and interactions settings with regard on response, which is the minimal temperature. At the end of master’s thesis is the final evaluation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229772 |
Date | January 2011 |
Creators | Lachnit, Zdeněk |
Contributors | Bednář, Josef, Kotek, Luboš |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds