The purpose of dissertation is the analysis of the calculation of fracture parameters using Double-K fracture model for quasi-brittle specimens with the stress concentrator loaded by three-point bending or wedge splitting. To calculation of these parameters was used the developed DKFM_BUT software in Microsoft Excel application with using of Visual Basic programming language. Furthermore, the adequate shape functions and compliance functions were introduced for the selected wedge splitting test configurations. Main part of this dissertation is the series of comprehensively implemented and evaluated fracture experiments on specimens from advanced building materials, while the attention was paid to the analysis of experimental data. Finally, the selected results obtained using mentioned software support were presented and discussed.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:355611 |
| Date | January 2016 |
| Creators | Havlíková, Ivana |
| Contributors | Králík,, Juraj, Němeček,, Jiří, Keršner, Zbyněk |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds