The effects on heat transfer of piston crown surface finish and use of a metal based thermal barrier coating (TBC) on the piston crown were studied in an SI engine. Measured engine parameters such as power, fuel consumption, emissions and cylinder pressure were used to identify the effects of the coating and its surface finish. Two piston coatings were tested: a baseline copper coating and a metal TBC. Reducing surface roughness of both coatings increased in-cylinder temperature and pressure as a result of reduced heat transfer through the piston crown. These increases resulted in small improvements in both power and fuel consumption, while also having measurable effect on emissions. Oxides of nitrogen emissions were increased while total hydrocarbon emissions were decreased. Improvements attributed to the TBC were found to be small, but statistically significant. At an equivalent surface finish, the TBC performed better than the baseline copper finish.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/32264 |
| Date | 21 March 2012 |
| Creators | Memme, Silvio |
| Contributors | Wallace, James S. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0022 seconds