Anthrax spores, in weaponized form, are dangerous biological warfare agents. Handheld technology for the rapid detection of anthrax is greatly needed to improve national security. Methods to detect anthrax spores are diverse, with most taking at least an hour for positive identification. A viable option for rapid detection is analytical pyrolysis (AP), which produces chemicals containing taxonomical information (biomarkers). AP methods are reviewed and critically analyzed to show that reproducible detection of anthrax spores in a rapid manner (< 5 min) with a handheld device is not currently possible. A promising alternative to AP is the use of a catalyst to produce biomarkers from anthrax spores with improved selectivity and reproducibility. Catalytic materials having promise for this include platinum, nickel, and superacids. Experiments evaluating several of these materials are described. A biomarker mass spectral library was created, based on information available in the scientific literature, to facilitate analysis and identification of the biomarkers produced experimentally. The RAMFAC algorithm was used to deconvolute chromatographic peaks to produce clean mass spectra and match them against entries in the biomarker library. While the library is not complete, its use with the RAMFAC algorithm enabled detection of many important biomarkers in experiments involving catalytic breakdown of anthrax spores. Experimental results from preliminary tests of several catalysts are presented and discussed. Addition of catalysts in the form of platinum nanoclusters and superacids to bacterial spores in a commercial pyrolyzer effected an increase in the amount of biomarkers produced at mild conditions over traditional pyrolysis methods. Electroformed nickel mesh, on the other hand, demonstrated low catalytic activity for the production of biomarkers, likely due to poor contact of the spores with the mesh. Biomarkers similar to those published in the literature were observed, including dipicolinic acid, picolinic acid, propionamide, acetamide, diketopiperazines, fatty acids, furfuryl alcohol, and DNA bases. A statistically designed factorial study was used to determine the importance of temperature, spore loading, and nanocluster loading on the production of three important biomarkers. The relative importance of these variables differs for each of the three important biomarkers, suggesting they are produced by different reaction mechanisms.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-1643 |
| Date | 26 August 2005 |
| Creators | Smith, Phillip R. |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.002 seconds