The relationship between the fabric parameters, as independent variables, and the comfort related properties, as dependent variables, of commercial suiting fabrics, containing both natural and man-made fibres, have been studied. The fabric parameters measured in the study were mass, thickness, density, and air permeability. The comfort related properties, tested on a Permetest instrument, included water vapour permeability, water vapour resistance, and thermal resistance, with the moisture permeability index being derived. A total of 26 commercial suiting fabrics, covering a wide range of mass, as well as different fibre types and blends and fabric structures, was tested. The fibres covered, included wool, polyester, viscose, and cotton, while the fabric structures covered were 1x1 plain weave, 2x1 twill and 2x2 twill weave. The objectives of this study were to determine the empirical relationships between the measured fabric properties and the measured comfort related properties, and to determine the role, if any, of fibre type and fabric structure, since many claims are made in practice concerning the relative advantages, in terms of comfort, of a specific fibre type or blend, or fabric structure, over others, some of which being supported by research results. Since the fabrics covered, were commercial and were not engineered so that the different fabric parameters (independent variables) and fibre type and blend, as well as fabric structure could be varied independently of each other, the effects of the various fabric parameters on the fabric comfort related properties were determined and quantified by multiple regression analyses (multi-linear and multi-quadratic), and the best fit regression equations, and contribution of each parameter to the overall fit established. It was found that fabric thickness and fabric mass had the largest effect on the comfort related properties as measured here, fabric mass determining, to a large extent, water vapour permeability, and fabric thickness, thermal resistance. The rest of the fabric parameters included in the study had only a relatively small effect on the measured comfort related properties. The influence of fabric parameters, with particular reference to mass and thickness, on the measured comfort related properties, were much greater than that of fibre type or blend, or fabric structure. It was, therefore, concluded from this study, that the fabric parameters, as opposed to the intrinsic characteristics of a particular fibre, whether natural or man-made, largely determined those fabric comfort related properties measured here.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:10455 |
| Date | January 2013 |
| Creators | Stoffberg, Marguerite Ester |
| Publisher | Nelson Mandela Metropolitan University, Faculty of Science |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MSc |
| Format | xvii, 151 leaves, pdf |
| Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0021 seconds