Title: Materials for fusion applications and their interaction with tokamak plasma Author: Veronika Klevarová Department: Department of Physics of Materials Supervisor: doc. RNDr. Miloš Janeček, CSc., Department of Physics of Materials Abstract: Tungsten represents a perspective option in the context of fusion devices first-wall materials. In the first part of this work, set of tungsten samples with variable grain size was prepared by spark plasma sintering. Specimens were exposed to steady state deuterium plasma beam and high energy heat pulses, simulating thus the normal operation in the tokamak. As a consequence of the exposure, samples surfaces were roughened, as-prepared grains were recovered and in some cases cracks were formed. Moreover, post-irradiation analysis of the damaged samples revealed activation of in-grain slip systems within the loaded surfaces. Threshold grain diameter for this mechanism was determined to be between 5.5 - 6.6 μm at the particular loading conditions. However, damaged features showed to depend more on the fabrication parameters than on the grain diameter. Synergistic effects of simultaneous loading were proven to be important since those reduced the heat propagation within the volume of the tested samples. In the second part of this thesis, introduction to plasma-surface...
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:345466 |
| Date | January 2016 |
| Creators | Klevarová, Veronika |
| Contributors | Janeček, Miloš, Šíma, Vladimír |
| Source Sets | Czech ETDs |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds