Master's thesis deals with consideration possibility of conventional and unconvetional welding methods of wrought magnesium alloys. Methods of Friction Stir Welding, Pulsed Nd:YAG laser and Continuous Fiber laser was used to join magnesium alloy sheets AZ31, AZ61, ZE10 and ZE41. For studying influence of processing parameters on microstructure and mechanical properties were used methods of light microscopy, scanning electron microscopy, tensile tests and microhardness measurements. The results of tensile tests show that from the point of view of keeping ultimate tensile strength is the best methods for welding magnesium alloys Friction Stir Welding. Compared with Nd:YAG laser, fiber laser give better properties of welds. From comparing microstructure and mechanical properties . It wasn't found publications about Friction Stir Welding of magnesium ZE alloys or about FSW sheets with thickness only 0,8 mm and 1,6 mm.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229929 |
| Date | January 2011 |
| Creators | Klimčáková, Kateřina |
| Contributors | Mrňa, Libor, Doležal, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds