Accurate camber prediction in prestressed concrete bridge beams is important to all parties involved in bridge design and construction. Many current prestress loss prediction methods, necessary for proper camber calculation, were developed many years ago and are predicated on assumptions that may no longer be valid as higher strength concrete, wider beam spacing, and longer span lengths become more commonplace. This throws into question which models are appropriate for use in camber calculation by the bridge engineers and contractors of today.
Twenty-seven high-strength concrete modified 79 in. Bulb Tee beams with a design compressive strength of 9,000 psi were periodically measured to determine camber growth. Most available models for concrete creep and shrinkage were used to calculate creep and shrinkage strain. The modulus of elasticity equation of each model was used to predict modulus of elasticity of the studied mix. The Shams and Kahn compressive strength and modulus of elasticity equations were modified in order to approximate measured modulus of elasticity. The creep, shrinkage, and modulus of elasticity equations were used as inputs to an incremental time step method. The time-dependent change in beam curvature calculated by the time step method was used to calculate theoretical camber using the Moment-Area method. Predicted camber, using inputs from each considered model, was then compared with measured camber to determine the most accurate camber prediction models. Season of casting was also examined to determine what, if any, affect ambient temperature has on camber growth.
For the studied beams, the Shams and Kahn Model for creep, shrinkage, and modulus of elasticity, used as inputs for an incremental time step analysis, were found to most accurately predict camber values. Lower concrete compressive strength was observed for test cylinders from beams cast in summer versus beams cast in winter. Differences in beam deflection based on season of casting showed mixed results. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/34740 |
Date | 14 September 2006 |
Creators | Hinkle, Stephen Dock |
Contributors | Civil Engineering, Roberts-Wollmann, Carin L., Weyers, Richard E., Cousins, Thomas E. |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Detected Language | English |
Type | Thesis |
Format | application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | Hinkle_Thesis.pdf |
Page generated in 0.0015 seconds