Presented diploma thesis was created in cooperation with Siemens s.r.o., and deals with the analysis of the bending of aluminium sheets which are later used as a conductors of high voltage electrical energy. These parts are completed into assemblies which serves as connectors of particular segments of an electrical network. The problem occurs as a result of incorrect bend, because it is impossible to join these sections properly. The customer would like to verify if the defined tolerances of semi-finished products are sufficient for proper bend and in case they are not, the tolerances should be modified. Due to the requirement for running numerical simulation in one of the open source software, the Salome-Meca program environment was used.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:382553 |
| Date | January 2018 |
| Creators | Anděl, Tomáš |
| Contributors | Kubík, Petr, Vosynek, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds