Return to search

Obrábění těžkoobrobitelných materiálů / Machining of hard-to-machine materials

General perspective of this diploma thesis was aimed at machining of hard-to-machine materials. Theoretical part contains division and specification of these types of materials. Ways of classification and evaluation were also listed. Causes of worsened machinability were defined with the design of possible technological solutions, which eliminates these features. The main target of experimental part was turning nickel-based superalloy Inconel® 718 with the purpose of increase process productivity. Knowledge about appropriate types of cutting tool material and his coating were necessary for process optimization. It was achieved by replacing reference cutting tool material (coated carbide inserts) with SiAlON ceramic. Cutting tool edge was tested with an intention to discover appropriate deal between tool life and volume of material removed. Measured cutting forces, generated by machining of reference and optimize technology, were processed by using simulation software. Total deformation of workpiece material was statistically evaluated. The conclusion of diploma thesis is technical-economic evaluation of both options.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379004
Date January 2018
CreatorsVarhaník, Matúš
ContributorsPolzer, Aleš, Píška, Miroslav
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0021 seconds