Return to search

Zavedení systému kontroly opotřebení při vrtání a řezání závitů do strojních dílů / Establishment of a wear control system for drilling and tapping when machining parts

The topic of this thesis is divided in two main parts. The first is about the “tool/workpiece pair” method and the second is related to wear monitoring. The entire project will be about drilling and tapping operations done in SNECMA Vernon. In fact, the part is very expensive so they have to be closely controlled to avoid a maximum scrap pieces. Two software will be used to control it. Firstly, the “tool/workpiece pair” will be done through AMC3 (software developed at the ENSAM). And secondly the wear monitoring will be ensured by the software CTM Visu (developed by ARTIS). My task will be to learn how to use those software and then to implement them in the company.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231706
Date January 2014
CreatorsFortunet, Charles
ContributorsPolzer, Aleš, Píška, Miroslav
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0019 seconds