The purpose of this study was to characterize the leachate from a landfill in Pennsylvania that had been pretreated by activated sludge and propose the most efficient treatment for this effluent. These samples had been pretreated in a sequencing batch reactor that also was operated to remove nitrogen by nitrification/denitrification. The SBR samples were found to have low BOD, high COD, high TOC and a very low BOD/COD ratio. These SBR decant samples have poor UV transmittance and hence quench UV light. Five treatment methods were evaluated, coagulation, ultrafiltration, combined coagulation/ultrafiltration, combined ultrafiltration/oxidation and combined filtration/fentons. These processes were tested for their ability to remove BOD and TOC and also to evaluate the improvement in UV transmittance. It was found that coagulation; Ultrafiltration and Ultrafiltration combined with coagulation do not work in improving the transmittance properties though there is a significant BOD and TOC removal with these processes. Ultrafiltration combined with oxidation was found to work the best in terms of TOC removal. In this study, four oxidants, KMnO?, H?O?, NaOCl and Fenton's reagent were used. It was observed that Fenton's reagent was capable of removing 90% TOC at a dose of 1g/L each of iron salt and hydrogen peroxide at a pH of 4.5. Since Fentons reagent was found to be the most effective method, hence, efforts were made to optimize the oxidation process with Fenton's. The two parameters which were studied were the initial pH and the chemical dosage. The initial pH was varied from a value of 2.5 to 6.5. The range of iron salt and peroxide dose used was from 0.05 to 0.1 g/L. Additional studies were conducted using samples filtered through a 0.45 um filter and oxidized with Fenton's reagent. The Fenton's process for oxidation of filtrates from the 0.45?m filter was also optimized with respect to pH and chemical dosage to determine the most economical operating conditions. The maximum transmittance of 57% was obtained for an iron dose of 0.075 g/L and a peroxide dose of 0.075 g/L at a pH of 4.5. This is in comparison to the transmittance of unoxidized 1K ultrafiltrate which was found to be 21.5%. There was a significant difference in the performance of 1K and 0.45um filtrates in terms of TOC removal and percentage transmittance. The oxidation process for improving the UV transmittance of leachate can therefore be economically optimized depending upon the desired efficiency by varying the operational parameters. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/76771 |
| Date | 17 June 2010 |
| Creators | Gulati, Loveenia |
| Contributors | Environmental Engineering, Novak, John T., Randall, Clifford W., Goldsmith, C. Douglas, Jr. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | en_US |
| Detected Language | English |
| Type | Thesis, Text |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0024 seconds