This thesis documents research done for a transient hot wire system that will be used in future thermal conductivity measurements of molten salts. Research done with molten salts have been limited because of erroneous measurement capabilities, but the current research strives to introduce a new technique to accurately record thermal conductivity over a wide range of temperatures. This work follows up on past transient hot wire researchers whose designs and tests produced an instrument that can measure the thermal conductivity of molten metals up to 750 K. The transient hot wire (THW) technique has been selected to be used in molten salt to derive thermal conductivity values. While running a THW test in molten salts is outside the scope of this thesis, a modular system has been created for the use of running transient hot wire test that allows for a robust and repeatable testing. A PEGDA/galinstan sensor is used for the validation of the system. A robust GUI has been created to automate the experimental procedure in a glovebox environment. The inverse finite element method has been paired with a non linear fit script to optimize calculations and reduce run times. Test have been done to determine the thermal conductivity of PEGDA. The overall uncertainty of the thermal conductivity measured with the PEGDA sensor is estimated to be ±5% at a 95% confidence level. With a THW system implemented and validated a sensor has been designed to work in molten salts. A model has been created in two separate FEA programs to validate design changes and material properties. The sensor is made up of a chemical vapor deposition (CVD) diamond substrate and tungsten wires to overcome corrosion and heat challenges introduced when measuring molten salts. New manufacturing processes have been designed to allow the technique to use these materials in the THW sensor design. The selected material properties of the sensor and extensive finite element work have laid down the ground work for future experimentation and understanding of the thermal properties of molten salts. It is predicted that the CVD diamond (carbide) apparatus design will use the THW techniques to operate with an estimated accuracy of ±3% over a wide range of temperatures, from ambient up to 1200 K. Manufacturing of the diamond-tungsten sensor have proven the viability of depositing tungsten wire onto CVD diamond and growing a secondary layer of CVD diamond over the tungsten wire.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-11159 |
| Date | 09 June 2022 |
| Creators | Kasper, Peter Charles |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | https://lib.byu.edu/about/copyright/ |
Page generated in 0.0018 seconds