Multidisciplinary design optimization (MDO) requires many designs to be evaluated while searching for an optimum. As a result, the calculations done to evaluate the designs must be quick and simple to have a reasonable turn-around time. This makes aerodynamic calculations in the transonic regime difficult. Running computational fluid dynamics (CFD) calculations within the MDO code would be too computationally expensive. Instead, CFD is used outside the MDO to find two-dimensional aerodynamic properties of a chosen airfoil shape, BACJ, at a number of points over a range of thickness-to-chord ratios, free-stream Mach numbers, and lift coefficients. These points are used to generate surrogate models which can be used for the two-dimensional aerodynamic calculations required by the MDO computational design environment. Strip theory is used to relate these two-dimensional results to the three-dimensional wing. Models are developed for the center of pressure location, the lift curve slope, the wave drag, and the maximum allowable lift coefficient before buffet. These models have good agreement with the original CFD results for the airfoil. The models are integrated into the aerodynamic and aeroelastic sections of the MDO code. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/71321 |
| Date | 06 June 2016 |
| Creators | Segee, Molly Catherine |
| Contributors | Aerospace and Ocean Engineering, Schetz, Joseph A., Kapania, Rakesh K., Raj, Pradeep |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/octet-stream, application/pdf, application/octet-stream, application/pdf, application/octet-stream |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0029 seconds