Stochastic model predictive control (MPC) is a fascinating field for research and of increasing practical importance since optimal control techniques have been intensively investigated in modern control system design.
With the development of computer technologies and communication networks, networked control systems (NCSs) or cyber-physical systems (CPSs) have become an interest of research due to the comprehensive integration of physical systems, such as sensors, actuators and plants, with intricate cyber components, possessing information communication and computation.
In CPSs, advantages of low installation cost, high reliability, flexible modularity, improved efficiency, and greater autonomy can be obtained by the tight coordination of physical and cyber components.
Several sectors, including robotics, transportation, health care, smart buildings, and smart grid, have witnessed the successful application of CPSs design.
The integration of extensive cyber capability and physical plants with ubiquitous uncertainties also introduces concerns over communication efficiency, robustness and stability of the CPSs.
Thus, to achieve satisfactory performance metrics of efficiency, robustness and stability, a detailed investigation into control synthesis of CPSs under the stochastic model predictive control framework is of importance.
The stochastic model predictive control synthesis plays a vital role in CPSs design since the multivariable stochastic system subject to probabilistic constraints can be controlled in an optimized way.
On the other hand, aperiodically sampled, or event-based, model predictive control has also been applied to CPSs extensively to improve communication efficiency.
In this thesis, the control synthesis and analysis of aperiodically sampled stochastic model predictive control for CPSs is considered.
Chapter 1 provides an introductory literature review of the current development of stochastic MPC, distributed stochastic MPC and event-based MPC.
Chapter 2 presents a stochastic self-triggered model predictive control scheme for linear systems with additive uncertainty and with the states and inputs being subject to chance constraints. In the proposed control scheme, the succeeding sampling time instant and current control inputs are computed online by solving a formulated optimization problem.
Chapter 3 discusses a stochastic self-triggered model predictive control algorithm with an adaptive prediction horizon. The communication cost is explicitly considered by adding a damping factor in the cost function. Sufficient conditions are provided to guarantee closed-loop chance constraints satisfactions. Furthermore, the recursive feasibility of the algorithm is analyzed, and the closed-loop system is shown to be stable.
Chapter 4 proposes a distributed self-triggered stochastic MPC control scheme for CPSs under coupled chance constraints and additive disturbances.
Based on the assumptions on stochastic disturbances, both local and coupled probabilistic constraints are transformed into the deterministic form using the tube-based method, and improved terminal constraints are constructed to guarantee the recursive feasibility of the control scheme. Theoretical analysis has shown that the overall closed-loop CPSs are quadratically stable. Numerical examples illustrate the efficacy of the proposed control method in terms of data transmission reductions.
Chapter 5 concludes the thesis and suggests some promising directions for future research. / Graduate / 2022-01-15
| Identifer | oai:union.ndltd.org:uvic.ca/oai:dspace.library.uvic.ca:1828/12671 |
| Date | 11 February 2021 |
| Creators | Chen, Jicheng |
| Contributors | Shi, Yang |
| Source Sets | University of Victoria |
| Language | English, English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | Available to the World Wide Web |
Page generated in 0.0024 seconds