Master thesis focused on the research of the effervescent atomizers. Effervescent atomizers belong to a group of two-phase atomizers, which are often used in combustion applications. Right there in combustion applications, the degree of the stability sprays has a significant impact on combustion efficiency and exhaust gas emissions. The main aim of this work was to asses the level of spray unsteadiness depending on the atomizer design and its operating mode. The effect of construction was studied on the diameter and length of mixing chamber, and then on the size, number and location of aeration holes. Seventeen specific variants of the atomizer were constructed by different combinations of these design parameters. Each of these variants was measured in three operating modes, which were represented by a liquid pressure at the inlet to the atomizer and gas-to-liquid mass flow ratio (GLR). To evaluate the level of spray unsteadiness was used a methodology, which compares the ideal element´s distribution into the interparticle time bin, defined for the ideal (stable) spray, with the experimentally observed distribution. The laser measurement system P/DPA (Phase Doppler Particle Analyzer) was used to determine the experimental interparticle distribution. The result of the comparison of the ideal and the experimental distribution was the parameter , which expresses the level of spray unsteadiness for a specific atomizer and operating mode. With that parameter it was possible to compare the individual atomizers and determinate to the benefit of various construction´s correction of the atomizer. The results showed the recommendation for the modifications of the atomizer, creating a spray with a minimum level of spray´s unsteadiness. For the surveyed atomizer and his individual costruction´s variations the drawing was made.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228558 |
Date | January 2009 |
Creators | Beinstein, Zbyněk |
Contributors | Volavý, Jaroslav, Jedelský, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.2229 seconds