Master thesis analyzes rotary draw bending of the tubes without using a mandrel. Bending process is accompanied by many defects due to large displacement of formed material. One of the major defects is flattering of the cross section also called ovality. In order to decrease ovality comes up a proposal of the changes to the tool design. Modifications of tool’s geometry are numerically analyzed by finite element method in software ANSYS. According to the results of the simulations an optimized pressure die is manufactured. Several experimental tests are accomplished to verify the effect of the optimized tool design. Approximately 100 bends confirm a decrease of ovality using modified pressure die.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318754 |
Date | January 2017 |
Creators | Šrom, Jan |
Contributors | Řiháček, Jan, Peterková, Eva |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds