Return to search

Multiscale Analysis of Failure in Heterogeneous Solids Under Dynamic Loading

Plane strain transient finite thermomechanical deformations of heat-conducting particulate composites comprised of circular tungsten particulates in nickel-iron matrix are analyzed using the finite element method to delineate the initiation and propagation of brittle/ductile failures by the nodal release technique. Each constituent and composites are modeled as strain hardening, strain-rate-hardening and thermally softening microporous materials. Values of material parameters of composites are derived by analyzing deformations of a representative volume element whose minimum dimensions are determined through numerical experiments. These values are found to be independent of sizes and random distributions of particulates, and are close to those obtained from either the rule of mixtures or micromechanics models.

Brittle and ductile failures of composites are first studied by homogenizing their material properties; subsequently their ductile failure is analyzed by considering the microstructure. It is found that the continuously varying volume fraction of tungsten particulates strongly influences when and where adiabatic shear bands (ASB) initiate and their paths. Furthermore, an ASB initiates sooner in the composite than in either one of its constituents.

We have studied the initiation and propagation of a brittle crack in a precracked plate deformed in plane strain tension, and a ductile crack in an infinitely long thin plate with a rather strong defect at its center and deformed in shear. The crack may propagate from the tungsten-rich region to nickel-iron-rich region or vice-a-versa. It is found that at the nominal strain-rate of 2000/s the brittle crack speed approaches Rayleigh's wave speed in the tungsten-plate, the nickel-iron-plate shatters after a small extension of the crack, and the composite plate does not shatter; the minimum nominal strain-rate for the nickel-iron-plate to shatter is 1130/s. The ductile crack speed from tungsten-rich to tungsten-poor regions is nearly one-tenth of that in the two homogeneous plates. The maximum speed of a ductile crack in tungsten and nickel-iron is found to be about 1.5 km/s.

Meso and multiscale analyses have revealed that microstructural details strongly influence when and where ASBs initiate and their paths. ASB initiation criteria for particulate composites and their homogenized counterparts are different. / Ph. D.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/29650
Date23 November 2004
CreatorsLove, Bryan Matthew
ContributorsEngineering Science and Mechanics, Batra, Romesh C., Plaut, Raymond H., Thangjitham, Surot, Hyer, Michael W., Kapania, Rakesh K.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeDissertation
Formatapplication/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationBMLoveETD_2.pdf

Page generated in 0.0023 seconds